To give you more detail about how we install our water dispenser solutions at Coolersense, here are our methods and other important information to make sure you are prepared for your installation.
Generally, each of our water dispensers require the same main basics for a straightforward and speedy installation. As you can see in our diagram below, these are a power supply, a water supply and a filter.
Our water coolers, instant hot water taps and countertop drinking water boilers require a standard socket as they are fitted with a standard 3-pin / 13amp plug. However, instant hot water taps require the socket to be located under the counter and wall mounted drinking water boilers require a 13-amp fused spur.
Your building is more than likely to have the potable drinking water supply you need for your water dispenser installation. If you are unable to identify the correct source, consult our team or a qualified plumber.
At Coolersense, we know what some water can taste like, which is why we fit every machine with a taste, odour or ScalePro filter as required. This way, you can guarantee your water will always be filtered and fresh.
Parts & Safety Devices
We are able to fit water blocks and leak detectors when installing your water dispenser. This will give you peace of mind that you will avoid any leaks or floods.
Expert Water Dispenser Installation and Aftercare Services
Book a trial and our engineer will bring a cooler with him, survey and install it if you wish. To arrange a specific site survey, please call us to organise – There is no cost for this service.
If you have any questions about your installation, please don’t hesitate to contact our team. We would be more than happy to help and advise you with your water dispenser installation and talk you through any queries you may have.